If you've ever struggled with sharpening a card scraper or using your
handplanes while building furniture, there are two new DVDs on these
topics you should find useful.
"Hand Scrapers: Understanding,
Preparing and Using the Ultimate Finishing Tool" and "Building
Furniture with Hand Planes" were produced by Lie-Nielsen Toolworks and hosted by Woodworking Magazine editor Christopher Schwarz (that's me).
The
DVD on scrapers is based on my research into all the conflicting advice
given on sharpening scrapers. I went through every one of my
woodworking books and found 14 distinctly different methods explained
for preparing this simple rectangle of steel. Using each of these techniques, I then prepared 14 scrapers and we compared the results in our shop here at Popular Woodworking.
And, as is our
way, we took the best details from all the techniques to create a 15th
way to sharpen card scrapers that is fast and makes a hook that is far
more durable than those on any other scraper I've used. This 30-minute
DVD shows you, step-by-step, how to prepare a scraper using these
methods and how to properly use the tool.
Now, I generally am
the harshest critic of own work (just ask Lucy, my spouse), but this
DVD and the technique shown is one of the things I'm most proud of in
my 11 years here at the magazine. It really was one of those few "a-ha"
moments of my career. I hope you'll agree.
The other DVD,
"Building Furniture with Hand Planes," explores a realm of hand-tool
instruction that gets little ink. While there are endless articles on
how to set up a plane (I should know, I've written some of them), there
is precious little advice out there on how to actually use the tools on
furniture. After all, we don't make shavings, we make furniture.
This
60-minute DVD shows you how to use a jointer plane, smoothing plane and
block plane when building furniture. I offer my method for setting up
all three planes with slightly curved cutting edges and how to use
those curved edges to your advantage when making furniture.
With the jointer plane (one of my all-time favorite tools), I discuss:
• How to work on edges to produce square, straight edges and spring joints.
• How to work on assembled panels and case sides to flatten them using cross-grain and diagonal strokes.
• How to turn your tail vise into a huge shooting board (an old French trick).
• How to gang-plane your boards to identical thickness.
• How to cut tapers to fit an inset door.
• Match-planing, the pros and cons.
With the smoothing plane, I discuss:
• How to set up the tool to take a very fine shaving.
• How to use your smoother as little as possible (and why)
• How to smooth assemblies.
And for the block plane, I discuss:
• Why a curved iron is sometimes desirable.
• How to trim end grain without blowing out the ends of your work.
• How to use the tool for chamfering and in conjunction with your jointer plane to eliminate the splintering of edges.
The DVD on scrapers costs $20; the DVD on using planes in furniture work is $25. Both are in stock and available from Lie-Nielsen Toolworks. Also, all Chris's proceeds from these two DVDs go to the Roger Cliffe Memorial Fund, a charity that provides tuition assistance to students in need at the Marc Adams School of Woodworking. So your purchase will help other woodworkers.
— Christopher Schwarz